End suction pump for fire protection system

Fire is something that people can't do without, and many aspects of our lives can't do without it. It can bring light and warmth to our life, but it may also bring dangerous disasters. "Fire and water are merciless" means its harm. I often hear that there is a fire or something because of so and so, and this kind of thing often happens. Then the fire fighting system will be used to extinguish the fire when it happens.

The most important equipment in the fire protection system is the water pump. When conducting fire rescue, the water pump must deliver a large amount of water. Using the largest amount of water to extinguish the fire in the shortest time can reduce losses and casualties. The flow of general water pumps is not very large, which is far from the flow requirements of fire pumps. What kind of pump can meet the requirements of water flow?

The end suction centrifugal pump is a non self-priming, single pole, single suction pump with fixed pump body and base. Its maximum working flow can reach 1200 cubic meters per hour. Therefore, this series of pumps fully meet the needs of fire water supply and can improve its fire extinguishing speed. The mechanical seal of this series is a standard wear-resistant mechanical seal, while the bearing uses a bearing frame, which can position the bearing, avoid the vibration of the bearing, and also improve the rigidity of the rotor parts. Therefore, the service life of this series of pumps will be longer. At the same time, this series of water pumps also have the functions of stable operation, convenient maintenance, low operating noise, etc., so this series of water pumps is the first equipment in the fire protection system.